|
Lean Six Sigma White Belt Page 5 (Dumps)
Question No:-41
|
FMEA is a tool in six sigma, which is:
1. A tool for calculating the measures of risk or failure in a process or a system.
2. A tool for understanding the loss of funds in a process, which is going to fail
3. A tool, which measures the ratio of percentage loss and profit of s company.
4. All of the above.
|
Answer:-2. This is the method of analyzing accurate measurement system.
Hint:-
Failure Mode Effect analysis is a tool to measure the risk of a process or a system failing to produce as per the requirement and then working on the problem to overcome.
|
|
Question No:-42
|
What do you understand about COPQ in six sigma?
1. Cost of producing quality.
2. Cost Of Poor Quality.
3. Cost Of Processing Quality.
4. Cost Of Preparing Quality.
|
Answer:-2. Cost Of Poor Quality.
Hint:-
Cost of Poor Quality is the cost caused through producing defects.
|
|
Question No:-43
|
Explain FMEA in six sigma belt?
1. FMEA is a spreadsheet data of risk factor of a working process to help the team.
2. FMEA is a data of measurement of any process related with production.
3. It is a factor of the production process, which indicates reliability.
4. It is one of the most commonly used statistical process control procedure.
|
Answer:-1. FMEA is a spreadsheet data of risk factor of a working process to help the team.
Hint:-
FMEA is generally a spreadsheet data chart or can be called as a tool for calculating the risk factor of any process for failing
|
|
Question No:-44
|
What is the 1.5 sigma shift?
1. The 1.5 sigma shift is the process of collecting data of every cycle for identifying difference.
2. It is the numerical tool of six Sigma.
3. It is used for measuring the customer requirements.
4. It is the producing unit of six Sigma.
|
Answer:-1. The 1.5 sigma shift is the process of collecting data of every cycle for identifying difference.
Hint:-
The 1.5 sigma shift is the process of collecting data of any process in many cycles of manufacturing, whether it has a difference.
|
|
Question No:-45
|
Which of the following facts are true about X-bar and R charts?
1. These are the two charts of monitoring the behavior and the outcome of any process.
2. This is a tool for starting up the Six Sigma.
3. This two chart is used for counting the total manufactured products and the total requirement of manufacturing.
4. It is used for the production of process report in Six Sigma.
|
Answer:-1. These are the two charts of monitoring the behavior and the outcome of any process.
Hint:-
This is a set of chart, which is the most important factor of process control, they include the inspection of behavior and outcome of any process of manufacturing
|
|
Question No:-46
|
What is the Pareto principle?
1. It is the 80/20 rules in six sigma belt, in most of the cases, 20% of the effect comes from the 80% of the causes.
2. It is the 90/10 rules in Sigma Belt.
3. It is used with continuous measuring in Sigma Belt.
4. It is one of a different kinds of variation use in six Sigma.
|
Answer:-1. It is the 80/20 rules in six sigma belt, in most of the cases, 20% of the effect comes from the 80% of the causes.
Hint:-
The pareto principle states that for most of the cases 80% of any effect is caused from 20% of the main reason. This principle is worlwide accepted at present.
|
|
Question No:-47
|
What are the main variations of six sigma?
1. mean, median, range and mode
2. DPPM and COPQ
3. Pareto principle and R charts
4. Only mean and median
|
Answer:-1. mean, median, range and mode
|
|
Question No:-48
|
What is standard deviation?
1. It is a measuring process to measuring the average spread of data.
2. This is the process of deviation.
3. It is a process capability index.
4. It is the process of calculating the difference between customer requirement and production.
|
Answer:-1. It is a measuring process to measuring the average spread of data.
Hint:-
It is the process of calculating the difference between customer requirement and production.
|
|
Question No:-39
|
What does Cpk means in six sigma belt?
1. The process Capability index.
2. The process of calculating data of a process.
3. It is a diagram, which shows the production capability of any process.
4. None of the above.
|
Answer:-1. The process Capability index.
|
|
Question No:-50
|
What is Ppk in six sigma belt?
1. It is a measuring process to measuring the average speed of production.
2. It is a diagram displaying the sequential steps of an production.
3. It's term is used for measuring the data of employee performances of a company during a year.
4. This is the index of the performance of a process.
|
Answer:-4. This is the index of the performance of a process.
Hint:-
Ppk is the index, which dictates the performance of a process, whether it has came over the customer's need or not.
|
|
|