|
Apple 9L0-012 Exam (Mac Service Certification) Page 1(Dumps)
Question No:-1
|
What is the likely cause of an iMac (21.5-inch, Late 2013) producing a single error tone at startup that repeats every five seconds.
1. The unit does not have RAM or RAM is not installed properly.
2. The logic board has failed and must be replaced.
3. The RAM does not pass data integrity tests.
4. The hard drive has failed S.M.A.R.T. status.
|
Question No:-2
|
Rhonda claims that her Mac cannot connect wirelessly to her AirPort Express network at home. Which of the following would be the BEST question to ask her FIRST?
1. Have you tried connecting to a different Wi-Fi network?
2. Does your ISP support wireless access to the Internet?
3. Do you have a Thunderbolt to Ethernet adapter?
4. Have you updated your RAM?
|
Question No:-3
|
Power Nap operations on a MacBook Air (Mid 2012) will be suspended until the unit is connected to a power adapter when the charge is at what percentage or less?
1. 10 percent
2. 30 percent
3. 50 percent
4. 75 percent
|
Answer:-2. 30 percent
Note:-
When your battery has 30 percent or less charge, Power Nap operations will be suspended until you connect a power adapter. Power Nap communicates and transfers data for a only a few minutes per Power Nap cycle when running on battery. When connected to a power adapter, communications and data transfers are continuous.
|
|
Question No:-4
|
What color indicates that the Liquid Contact Indicators inside a MacBook Pro (13-inch, Mid 2012, have been triggered?
1. Red
2. Blue
3. White
4. Yellow
|
Answer:-1. Red
Note:-
The indicators trigger only with direct contact to a liquid. The indicators will not be triggered by temperature and humidity that is within the product's environmental requirements described by Apple. A triggered indicator will turn red or pink...indicating that the module(s) to which the indicator is attached has been exposed to liquid.
|
|
Question No:-5
|
Apple recommends a DIMM installation scheme for the Mac Pro (Late 2013) that:
1. Increases processing power
2. Enhances graphics processing
3. Optimizes system cooling
4. Enables use of special memory modules
Answer:-4. Enables use of special memory modules
Note:-
Apple recommends that you use Apple-approved DIMMs. You shouldn't use DIMMs from older Mac Pro computers in your new Mac Pro. You can purchase
Apple-branded memory online from the Apple Store or by visiting an Apple Retail store or Apple Authorized Reseller .
Reference:-https://support.apple.com/en-us/HT6054
|
|
Question No:-6
|
You must know the AppleCare name of an Intel iMac before performing which of the following actions?
1. Starting up from OS X Recovery HD.
2. Running Mac Resource Inspector.
3. Replacing the logic board
4. Resetting the NVRAM.
|
Question No:-7
|
Which of the following could indicate accidental damage when inspecting the inside of a Mac mini (Late 2012) before a repair?
1. Light dust in the fans
2. Third-party RAM installed
3. Lint gathered near the rear vents
4. Oxidation or discoloration of the logic board
|
Answer:-44. Oxidation or discoloration of the logic board
|
|
Question No:-8
|
Which of the following is a valid electrical safety precaution when working on a computer or display with exposed, potentially energized parts?
1. Use only metal screw drivers or fingers as needed to connect or disconnect cables.
2. Always wear an ESD wrist or heel strap when working on plugged in systems.
3. Be very careful handling the logic board or power supply while the computer is plugged in.
4. Remove rings, watches, necklaces, metal-rimmed eyewear and other metallic articles before working on the computer.
Answer:-4. Remove rings, watches, necklaces, metal-rimmed eyewear and other metallic articles before working on the computer.
Note:-Rings, watches, necklaces or any metallic wearables should be removed because metal will disturb the inner circuitry and the static charge will transfer to the sensitive parts of the computer.
Reference:-http://mdex-nn.ru/uploads/imac12.pdf
|
|
Question No:-9
|
You are inspecting a MacBook Pro as part of your troubleshooting process. You note that two of the screws on the bottom case are damaged. There is no record of the computer being repaired on a previous occasion. If the resolution to the issue requires that you replace a part, how does your discovery of the stripped screws impact that repair?
1. You need to thoroughly question the customer on previous repairs or attempted repairs by unauthorized service providers
2. Make sure to inspect internal components and connections carefully to make sure that components were not damaged by someone tampering with the computer
3. Complete the set of three modification tests as specified in GSX prior to opening the computer
4. Classify the repair as ineligible for service and explain to the customer that you will not be able to complete any repairs
|
Question No:-10
|
Where can a technician find the serial number of an SSD that has been replaced on a MacBook Pro (Retina, 13-inch. Early 2013)?
1. Lift the mylar cover on the SSD.
2. Peel back the thermal pad on the SSD
3. On the top case.
4. On the back of the SSD cable
|
Answer:-1. Lift the mylar cover on the SSD.
|
|
|